Skip to content

Homeowners begin thinking about their pool when the summer approaches because they want to use it throughout the season. Imagine the good lap-swimming workout, poolside parties and a weekend spent with family and friends soaking up some sun as you lounge by the water.  

Sadly, their pool maintenance is merely an afterthought as shown by a filter that is clogged with leaves and walls that are green due to slime.  

Allowing the pool to reach such levels may cost you a lot in terms of money and time. Thus, it’s vital to have a good pool maintenance routine.  

The following are the tricks of keeping your pool well-maintained throughout the year.  

Above ground pool design photo with wooden pool deck

Maintain Consistent Chemical Levels 

There are many facets of pool maintenance, but chemical levels should be the priority. Improperly balanced pool water is irritating to the skin, and the eyes, it has a murky appearance and harbours bacteria. 

Therefore, it’s essential to test your pool water every week to confirm the following chemical levels. 

PH Level: The pH level should be maintained at 7.5-7.8 to avoid eroding the pool equipment or irritating your skin.  

Calcium Hardness: The appropriate level should be 220-350 for it prevent plaster damage. However, pools with vinyl siding should have lower calcium hardness.  

Free Chlorine: It keeps the pool water free of germs and safe. 

Cyanuric Acid: The ideal level should be 30-50. It determines the suitable free Chlorine level and protects it from the sunlight.  

Alkalinity: It’s should be maintained in the range of 60-120 and is essential in balancing the pH. 

You can buy testing kits from a local store, fill them with a water sample from the pool and add the provided mixture to the kit and tighten the vials.   

The sample will change its colour to one shown on the testing kit chart. This will allow you to establish the current chemical levels which you should adjust to the ideal amount. 

Pool water should be crystal clear, without scent and leaves minimal residues on the skin when the chemicals are appropriately balanced.  

Shock a Cloudy Pool 

A pool should be shocked when necessary. The process is done in public and private pools as well because the water is murky after a big party by the water.  

Therefore, you need to get rid of the bacteria causing the murkiness as soon as possible. You can achieve this by diluting the standard amounts of chlorine or a different chemical sanitizer 3-5 times and releasing it to the pool through the return line. The process allows the chemical to filter into the entire pool before you refill it.  

Shocking should be done in the right way to avoid under or over-chlorinating the pool which can damage the liner, the filter and even yourself. The procedure should be done at least two times each season for the best pool maintenance practice.  

Pressure Wash the Pool Deck 

The deck is an area that surrounds the pool, and it’s as important as the pool itself. You can powder wash this area to get rid of weather stains or any rust that might have built up over time.  

The process should start with sweeping the deck to leave leaves and dirt from the surface and avoid scattering them when cleaning. The pressure washer has the power spray that ranges from weak to medium. This helps you to remove fine dust and the debris on the surface. You should repeat the process until you’re satisfied with the level of the deck’s cleanliness. 

You can prevent streaks by overlapping the areas and gouging by placing the power washer nozzle above the surface of the pool deck. That height should be maintained until you finish cleaning.  

Monitor the Pool Water Level  

The physical water level is equally important as the chemical composition of the pool. The level should be monitored because it keeps on fluctuating when it rains or when kids play with their cannonballs. 

Therefore, you should conduct regular pool maintenance that involves keeping the water level halfway up the skimmer’s opening.  

Use the garden house to top up or a submersible pump to drain the excess water and achieve the desired level. However, don’t use a pump on a fibreglass or vinyl material, instead, contact professionals from Pool Ideas for a thorough job. 

Always check the chemical level after either adding or removing water because the fluctuations throw them out of balance. 

Clean the Pool Filters 

Filters remove leaves, dirt and toys from the water. You can clean filters by merely lifting the cap situated on the pool deck, removing the filter basket, emptying the content and replacing it. 

Clean the filter’s pipes through backwashing every month. This is done by emptying the leaf basket first, setting the filter to backwash mode and allowing it to keep running until the waste pipe starts to release clear water. 

Pool filters should run for six hours each day. You can set it on an automatic mode to avoid cracking its mechanics when you do it manually. Therefore, you should ensure these features are working correctly when performing pool maintenance checks.  

Regular Skimming and Scrubbing 

Patio pool deisgn with a beautiful house near the pool

Leaves and debris fall on the pool water surface every minute; thus, skimming to remove debris and leaves should be done regularly. You can simplify the process by acquiring a robot vacuum that cleans up to the pool bottom. 

Another step is to scrub the sidings to prevent the buildup of algae. Scrubbing should be done every week. It can be done using a scrub brush, and this can give the siding a fresh and clean look. 

At the time the pool might have some stubborn spots that require extra efforts. You can achieve this using an old rug soaked in chlorine and allowed to settle on the area with stubborn stains and then scrub the spot thoroughly. 

Chlorine is the best cleansing agent when working on a severely stained surface because the chemical eats away the algae leaving the area looking clean.  

Always drain the pool, the filter, pipes and heater during the winter or any other time when you won’t need to use it for an extended period. It should also be disconnected from the pump, chemical feeders and heater. These efforts will help extend its lifespan. 

Hire Experts for the Yearly Pool Maintenance  

Professionals in the pool construction and maintenance are trained on how to monitor and repair mechanical equipment in your pool. They thoroughly examine the pool, repair and make recommendations on how you can always keep your pool sparkling clean. 

Therefore, contact Pool Ideas for more suggestions and annual pool maintenance schedule. 

Leave a Comment